Before you can purchase a Paint Spray Gun, you should understand what its main parts are. The gun's most important component is its airhead. It is the part of the spray gun that controls the consistency and quality of the paint. A poorly-functioning airhead will make your painting project look amateurish and messy. Cleaning your airhead is a must if you want to get a high-quality paint finish. This article explains what each part of the airhead does.

Suction feed

If you're planning to use a paint spray gun, you should know that the two types of feeds share several characteristics. Both types have two passageways - one for the fluid and the other for the air. Air rushes past the fluid and draws it into the stream, resulting in a spray mist. The mist then ejects from the nozzle. This is the primary difference between gravity feed and suction feed.

First, you need to fill the spray gun's cup. Fill it about two-thirds full and then add the appropriate amount of thinner or reducer. Some products require specific amounts of thinner, while others do not. For example, nitrocellulose lacquer does not require thinning before using it. When using a paint gun, you need to make sure that the pressure is right for your needs. You may need to experiment with a few different settings before finding the perfect one.

Syphon feed

There are several advantages of using a siphon feed for paint spray gun over a conventional paint sprayer. These types of sprayers require less air pressure to atomize the paint, which results in less overspray, waste, and less time spent cleaning. You can also easily remove excess paint without disassembling the gun, making them a great option for most types of coatings. This article will discuss some of these benefits.

Before using a siphon feed paint spray gun, prepare the material you're going to apply. First, fill the spray gun's cup two-thirds full. Next, add the appropriate amount of thinner or reducer. Note that some products require thinners, and others do not. Always follow the manufacturer's instructions when using a siphon feed paint spray gun. In the case of paint, the amount of thinner is typically the same as the amount of paint, whereas nitrocellulose lacquer does not need to be thinned.

Air assisted

Air-assisted paint spray guns are a great option for industrial painting jobs. They are effective in handling high-viscosity paints while maintaining an even paint application. Many types of airless paint spray guns are available. Air-less guns are also suitable for home projects, but they produce high levels of VOCs. It is advisable to check the manufacturer's manual to see what features are included. Listed below are some benefits of air assisted paint spray guns.

Unlike air-assisted airless spray guns, these air-assisted spray guns produce fine atomization when applying medium to high-viscosity fluids. These spray guns are excellent for painting wide surfaces and fabricated metal parts. Although air-assisted paint spray guns can be manual or automated, they have several advantages over their predecessors. Here are some of their benefits and drawbacks. If you're looking for an efficient and reliable spray gun, check out these pros and cons:

Flatline

A Paint Spray Gun Flatline machine is an automatic painting tool. It uses compressed air to atomize a liquid into a patterned pattern. A high-velocity stream of air impinges on the surface of the liquid, causing it to collapse into droplets of a variety of sizes. These droplets of paint are then applied to the object being painted. This process allows for even coverage on all sides.

 This system coats ceiling tiles, desk tops, fastener heads, and more. Depending on your needs, these systems can integrate surface preparation, curing ovens, and handling solutions. Here are three types of Flatlines available. Choose one that suits your needs. Let us help you find the right one for your business.